---

Hej Alle

Jeg er helt nybegynder med det er linux sjov...
.... men jeg har aligevel fået installeret samba... men, hver gang jeg prøve
at kontakte min linuxmaskine fra min windowsmaskine, så vil den have et
password for en bruger der hedder noget med Ipc...

Jeg tror at det har noget at gøre med at man skal lave en guest account...
men hvordan ??

Håber i kan hjælpe mig

Carsten Sørensen

---

---

"Carsten Sørensen" <Carsten.s@worldonline.dk> wrote:

>Jeg tror at det har noget at gøre med at man skal lave en guest account...
>men hvordan ??

Det er nok nærmere 'security = user', der skal ændres til 'security =
share'.


--
Allan Olesen, Lunderskov

"UNIX er overflødigt." - Lars P. Fischer

---

Eller prøv at lave en bruger på Linux maskine som har samme brugernavn og
password som på din Windowsmaskine.
Søren

"Carsten Sørensen" <Carsten.s@worldonline.dk> skrev i en meddelelse
news:dhjJ6.10979$T22.952536@news010.worldonline.dk...
> Hej Alle
>
> Jeg er helt nybegynder med det er linux sjov...
> ... men jeg har aligevel fået installeret samba... men, hver gang jeg
prøve
> at kontakte min linuxmaskine fra min windowsmaskine, så vil den have et
> password for en bruger der hedder noget med Ipc...
>
> Jeg tror at det har noget at gøre med at man skal lave en guest account...
> men hvordan ??
>
> Håber i kan hjælpe mig
>
> Carsten Sørensen
>
>
>
>

---

Nu har jeg prøvet alle de mulighede i har skrevet men der er stadig det
samme problem..

Hvad kan jeg gøre for at få det til at virke..?

Er der ikke en eller anden (som har en der virker) som vil sende mig sin
smb.conf ??

Mvh

Carsten Sørensen
Carsten.s@worldonline.dk

"Carsten Sørensen" <Carsten.s@worldonline.dk> skrev i en meddelelse
news:dhjJ6.10979$T22.952536@news010.worldonline.dk...
> Hej Alle
>
> Jeg er helt nybegynder med det er linux sjov...
> ... men jeg har aligevel fået installeret samba... men, hver gang jeg
prøve
> at kontakte min linuxmaskine fra min windowsmaskine, så vil den have et
> password for en bruger der hedder noget med Ipc...
>
> Jeg tror at det har noget at gøre med at man skal lave en guest account...
> men hvordan ??
>
> Håber i kan hjælpe mig
>
> Carsten Sørensen
>
>
>
>

---

On Mon, 7 May 2001 18:30:15 +0200, Carsten Sørensen <Carsten.s@worldonline.dk> wrote:
>Nu har jeg prøvet alle de mulighede i har skrevet men der er stadig det
>samme problem..
>
>Hvad kan jeg gøre for at få det til at virke..?
>
>Er der ikke en eller anden (som har en der virker) som vil sende mig sin
>smb.conf ??
>
Den er efter min sig....


- Chano Andersen

----- /etc/smb.conf -------

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = PRIDE

# server string is the equivalent of the NT Description field
server string = Kovu

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.

hosts allow = 10.0.

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = share
# Use password server option only with security = server
; password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those document
; encrypt passwords = yes
; smb passwd file = /etc/smbpasswd

# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
; username map = /etc/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
#   a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = no

# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = <NT-Domain-Controller-SMBName>

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#   Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one   WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = yes
unix password sync = yes
netbios name = kovu
encrypt passwords = yes
map to guest = never
password level = 0
null passwords = no
os level = 0
preferred master = no
domain master = no
wins support = no
dead time = 0
debug level = 0
# message command = echo "Sorry %f your message to %t could NOT be delivered" | smbclient -M %f

message command = cat %s > /dev/pts/0 &

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
~
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /home/profiles
; browseable = no
; guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
# [printers]
# comment = All Printers
# path = /var/spool/samba
# browseable = no
# Set public = yes to allow user 'guest account' to print
# guest ok = no
# writable = no
# printable = yes

# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
[chano]
comment = Chano's Homedir
valid users = chano
path = /home/chano
;printer = freds_printer
public = no
writable = yes
printable = no
available = yes
browseable = yes
guest only = no
only user = no
invalid users = root anni guest

[Web_Root]
comment = The webservers root dir
available = yes
browseable = yes
path = /home/httpd
public = no
guest only = no
writable = yes
only user = no
valid users = chano
invalid users = anni root guest

[idedisk]
comment = /idedisk
available = yes
browseable = yes
path = /idedisk
public = no
guest only = no
writable = yes
only user = no
valid users = chano
invalid users = anni root guest

---

Carsten Sørensen <Carsten.s@worldonline.dk> skrev i
meldingsnyheter:S0AJ6.12514$T22.1112703@news010.worldonline.dk...
> Nu har jeg prøvet alle de mulighede i har skrevet men der er stadig det
> samme problem..
>
> Hvad kan jeg gøre for at få det til at virke..?
>
> Er der ikke en eller anden (som har en der virker) som vil sende mig sin
> smb.conf ??

Ny i denne tråden, men hvilken windows kjører du?

hvis det er 98 eller me så finnes det en fil på din linuxmaskin som heter et
eller annet med plainpasword.reg (søk etter *.reg(find / -name *.reg)).
Flytt den filen som passer best til din windowsmaskin med en disket og kjør
denne regfilen på windowsen, og du skal være kvit problemet med å måtte
skrive passordet til ipc$ (var det ikke det da?)

Til lykke
-Ove
Norge

---

Carsten Sørensen wrote in message ...
>Hej Alle
>
>Jeg er helt nybegynder med det er linux sjov...
>... men jeg har aligevel fået installeret samba... men, hver gang jeg prøve
>at kontakte min linuxmaskine fra min windowsmaskine, så vil den have et
>password for en bruger der hedder noget med Ipc...
>
>Jeg tror at det har noget at gøre med at man skal lave en guest account...
>men hvordan ??

Hvilket OS kører Windows systemet? Hvis du kører NT med Servicepack >3, skal
du have:

encrypt password = yes

Når du har oprettet en bruger på linux boxen, med samme login som på windows
boxen, skal du køre

?samba/bin/smbpasswd -a loginnavn

Husk også, når du har rettet i smb.conf, at genstarte smbd og evt. nmbd

Har du installeret swat? prøv at connecte til linux boxen med en browser
http://linuxbox:901

Prøøøv det - Kim

---

OKEY ... NU VIRKER DET...
Tak for jeres hjælp....men....

Jeg kan sagtens dele noget på min linux maskine... men...
hvis jeg vil kopiere til den eller slette på den fra min windows maskine, så
brokker den sig... jeg har prøvet med nogle forskellige settinges så som:

public = Yes
writable = Yes
read only = no

Håber i kan hjælpe mig

Carsten Sørensen


"Carsten Sørensen" <Carsten.s@worldonline.dk> skrev i en meddelelse
news:dhjJ6.10979$T22.952536@news010.worldonline.dk...
> Hej Alle
>
> Jeg er helt nybegynder med det er linux sjov...
> ... men jeg har aligevel fået installeret samba... men, hver gang jeg
prøve
> at kontakte min linuxmaskine fra min windowsmaskine, så vil den have et
> password for en bruger der hedder noget med Ipc...
>
> Jeg tror at det har noget at gøre med at man skal lave en guest account...
> men hvordan ??
>
> Håber i kan hjælpe mig
>
> Carsten Sørensen
>
>
>
>

---

---

> Ok. Det får samba-processen til at acceptere skrivning. Det
> underliggende filsystem kan dog stadig nægte adgang...

Den skal jeg lige have skåret ud i pap ???

Carsten Sørensen

---

In article <EnAK6.1790$zv2.269115@news010.worldonline.dk>, "Carsten
Sørensen" <Carsten.s@worldonline.dk> wrote:

>> Ok. Det får samba-processen til at acceptere skrivning. Det
>> underliggende filsystem kan dog stadig nægte adgang...
>
> Den skal jeg lige have skåret ud i pap ???

man chmod

hvis du bare skal have noget til at virke uden de store overvejelser, er
det
chmod a+rw /sambabibliotek/
du skal have fat i.
--
Morten
A synonym is a word you use in place of one you can't spell

---

Det hjalp... Takker mange gange...
"Morten Breum Mikkelsen" <mbreum@odense.kollegient.dk> skrev i en meddelelse
news:9df8q6$op0$1@sunsite.dk...
> In article <EnAK6.1790$zv2.269115@news010.worldonline.dk>, "Carsten
> Sørensen" <Carsten.s@worldonline.dk> wrote:
>
> >> Ok. Det får samba-processen til at acceptere skrivning. Det
> >> underliggende filsystem kan dog stadig nægte adgang...
> >
> > Den skal jeg lige have skåret ud i pap ???
>
> man chmod
>
> hvis du bare skal have noget til at virke uden de store overvejelser, er
> det
> chmod a+rw /sambabibliotek/
> du skal have fat i.
> --
> Morten
> A synonym is a word you use in place of one you can't spell