---

Hej. Jeg har lige posted det her i den engelske Asus gruppe. Så vil jeg lge
prøve lykken her. (Ved jo, de fleste her kan engelsk.) - Svar gerne på
dansk. :)
-----------

Right, I've spent about two weeks of trying to get my PC to work, bought 3
new motherboards and two video cards, due to these problems. So please
excuse me, if I sound a little pissed.

Here is what I'm trying to get to work:

Asus A7V266-C
AMD Thoroughbred 2200+ XP
Apacer DDR 266MHz RAM (1x256Mb)
4 different AGP video cards
ATX chassis


I pulled everything out. Only using what is needed to POST.


Here's the problem:

I boot, and am taken directly to BIOS setup - where I set the freq./FSP
correctly.
Then save & exit.
Then it goes dead. It doesn't boot.
I have to power down, and start again in order to boot.
Here, of course, I get taken to BIOS again. And here we go again. Can't boot
>> power down >> go to BIOS. Etc, etc, etc.

What on Earth can be done here?
(http://www.asuscom.de/support/techmain/faq/amd_mb/faq085_CPU_Upgrade_II.htm
) tells me, I need to set the FID3 jumper to 1-2 to enable
Palamino/Thoroughbred. Well, that's nice and all. But I don't have the FID
jumpers on my mobo!

This is so frustrating. I feel like crying and smashing up my PC with a big
sledgehammer.

Please, please, somebody save my PC (and myself).

Any suggestions?

---

On Fri, 6 Sep 2002 14:49:30 +0200, "f00ge" <f00ge@*NOSPAM*gmx.net>
wrote:

>Hej. Jeg har lige posted det her i den engelske Asus gruppe. Så vil jeg lge
>prøve lykken her. (Ved jo, de fleste her kan engelsk.) - Svar gerne på
>dansk. :)
>-----------
>
>Right, I've spent about two weeks of trying to get my PC to work, bought 3
>new motherboards and two video cards, due to these problems. So please
>excuse me, if I sound a little pissed.
>
>Here is what I'm trying to get to work:
>
>Asus A7V266-C
>AMD Thoroughbred 2200+ XP
>Apacer DDR 266MHz RAM (1x256Mb)
>4 different AGP video cards
>ATX chassis
>
>
>I pulled everything out. Only using what is needed to POST.
>
>
>Here's the problem:
>
>I boot, and am taken directly to BIOS setup - where I set the freq./FSP
>correctly.

Det er måske her.
2200+ kører 13.5x133=1800
Det er vel det du indstiller ?

(glem alt om fsb 266, for det er ikke reelt men indirekte med
2x133=266)

Sidder reset cmos jumper på reset konstant (hele tiden) ?

mvh

John

---

"o&u" <johnknuhtsen@mail.dk> wrote:

> Det er måske her.
> 2200+ kører 13.5x133=1800
> Det er vel det du indstiller ?

Ja, jeg sætter den til 13.5x133 i BIOS.

> Sidder reset cmos jumper på reset konstant (hele tiden) ?

Nej.

---

Hvilken bios version har du ? Understøtter den T-bred ?

Hvad er CPU temperaturen ? (Bios Hardware monitor).
Mit A7V333 lukker ned ved ca 63 grader (er nu til ombytning).
--
Hilsen
Michael Lund Sørensen
www.milux.dk


"f00ge" <f00ge@*NOSPAM*gmx.net> wrote in message
news:3d78a467$0$5667$edfadb0f@dspool01.news.tele.dk...
> Hej. Jeg har lige posted det her i den engelske Asus gruppe. Så vil jeg
lge
> prøve lykken her. (Ved jo, de fleste her kan engelsk.) - Svar gerne på
> dansk. :)
> -----------
>
> Right, I've spent about two weeks of trying to get my PC to work, bought 3
> new motherboards and two video cards, due to these problems. So please
> excuse me, if I sound a little pissed.
>
> Here is what I'm trying to get to work:
>
> Asus A7V266-C
> AMD Thoroughbred 2200+ XP
> Apacer DDR 266MHz RAM (1x256Mb)
> 4 different AGP video cards
> ATX chassis
>
>
> I pulled everything out. Only using what is needed to POST.
>
>
> Here's the problem:
>
> I boot, and am taken directly to BIOS setup - where I set the freq./FSP
> correctly.
> Then save & exit.
> Then it goes dead. It doesn't boot.
> I have to power down, and start again in order to boot.
> Here, of course, I get taken to BIOS again. And here we go again. Can't
boot
> >> power down >> go to BIOS. Etc, etc, etc.
>
> What on Earth can be done here?
>
(http://www.asuscom.de/support/techmain/faq/amd_mb/faq085_CPU_Upgrade_II.htm
> ) tells me, I need to set the FID3 jumper to 1-2 to enable
> Palamino/Thoroughbred. Well, that's nice and all. But I don't have the FID
> jumpers on my mobo!
>
> This is so frustrating. I feel like crying and smashing up my PC with a
big
> sledgehammer.
>
> Please, please, somebody save my PC (and myself).
>
> Any suggestions?
>
>

---

Hej med dig

Har du fulgt manualens anvisninger?
ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt266a/a7v266-c/a7v266-c_100.pdf
MVH Gustav



"f00ge" <f00ge@*NOSPAM*gmx.net> skrev i en meddelelse
news:3d78a467$0$5667$edfadb0f@dspool01.news.tele.dk...
> Hej. Jeg har lige posted det her i den engelske Asus gruppe. Så vil jeg
lge
> prøve lykken her. (Ved jo, de fleste her kan engelsk.) - Svar gerne på
> dansk. :)
> -----------
>
> Right, I've spent about two weeks of trying to get my PC to work, bought 3
> new motherboards and two video cards, due to these problems. So please
> excuse me, if I sound a little pissed.
>
> Here is what I'm trying to get to work:
>
> Asus A7V266-C
> AMD Thoroughbred 2200+ XP
> Apacer DDR 266MHz RAM (1x256Mb)
> 4 different AGP video cards
> ATX chassis
>
>
> I pulled everything out. Only using what is needed to POST.
>
>
> Here's the problem:
>
> I boot, and am taken directly to BIOS setup - where I set the freq./FSP
> correctly.
> Then save & exit.
> Then it goes dead. It doesn't boot.
> I have to power down, and start again in order to boot.
> Here, of course, I get taken to BIOS again. And here we go again. Can't
boot
> >> power down >> go to BIOS. Etc, etc, etc.
>
> What on Earth can be done here?
>
(http://www.asuscom.de/support/techmain/faq/amd_mb/faq085_CPU_Upgrade_II.htm
> ) tells me, I need to set the FID3 jumper to 1-2 to enable
> Palamino/Thoroughbred. Well, that's nice and all. But I don't have the FID
> jumpers on my mobo!
>
> This is so frustrating. I feel like crying and smashing up my PC with a
big
> sledgehammer.
>
> Please, please, somebody save my PC (and myself).
>
> Any suggestions?
>
>