Kent Friis wrote:
> To gæt:
>
> - serveren ved godt at klienten hedder linux.local?
Det skal såmen slet ikke undre mig at problemet ligger der. Jeg er ikke
så vant til at arbejde med ipadresser så det er værd at undersøge nærmere.
lts.conf?
linux:/opt/ltsp/i386/etc # cat lts.conf
#
# Config file for the Linux Terminal Server Project (
www.ltsp.org)
#
[Default]
KDM_SERVER = 10.0.0.2
XSERVER = auto
X_MOUSE_PROTOCOL = "PS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_RESOLUTION = 400
X_MOUSE_BUTTONS = 3
USE_XFS = N
LOCAL_APPS = N
RUNLEVEL = 5
#------------------------------------------------------------------------------
#
# Example of specifying X settings for a workstation
#
[ws001]
KDM_SERVER = auto
X_MODE_0 = 640x480
USE_NFS_SWAP = N
SWAPFILE_SIZE = 48m
RUNLEVEL = 5
[ws002]
XSERVER = XF86_Mach64
LOCAL_APPS = N
USE_NFS_SWAP = Y
SWAPFILE_SIZE = 64m
RUNLEVEL = 5
#
# ws004 is my virtual workstation running in a VMware session
#
[ws004]
DNS_SERVER = 192.168.0.254
XSERVER = auto
X4_BUSID = "PCI:0:15:0"
X_MODE_0 = 800x600
LOCAL_APPS = N
USE_NFS_SWAP = N
SWAPFILE_SIZE = 64m
RUNLEVEL = 5
#------------------------------------------------------------------------------
#
# Example of a workstation configured to load some modules
#
#[ws001]
# MODULE_01 = agpgart.o # This is for i810 video
# MODULE_02 = uart401.o
# MODULE_03 = sb.o io=0x220 irq=5 dma=1
# MODULE_04 = opl3.o
#------------------------------------------------------------------------------
#
# Example of ws001 configured for local apps
#
#[ws001]
# LOCAL_APPS = Y
# LOCAL_WM = Y
# NIS_DOMAIN = ltsp
# NIS_SERVER = 192.168.0.254
#------------------------------------------------------------------------------
#
# Example of a serial printer attached to /dev/ttyS1 on workstation ws001
#
#[ws001]
# PRINTER_0_DEVICE = /dev/ttyS1
# PRINTER_0_TYPE = S # P-Parallel, S-Serial
# PRINTER_0_PORT = 9100 # tcp/ip port: defaults to 9100
# PRINTER_0_SPEED = 9600 # baud rate: defaults to 9600
# PRINTER_0_FLOWCTRL = S # Flow control: S-Software
(XON/XOFF),
# # H-Hardware (CTS/RTS)
# PRINTER_0_PARITY = N # Parity: N-None, E-Even, O-Odd
# # (defaults to 'N')
# PRINTER_0_DATABITS = 8 # Databits: 5,6,7,8 (defaults to 8)
linux:/opt/ltsp/i386/etc #