jsa!
Nogen som ved hvordan jeg får min IDE brænder, Lite-On LTR-12102B til at
virke under linux?
Jeg bruger Debian Testing med kernel 2.2.20.
Jeg har prøvet at følge vejledningen i
http://www.sslug.dk/linuxbog/applikationer/bog/cdrombraending.html
I lilo har jeg sat følgende ind: append="hdb=ide-scsi", og i modules har
jeg sat sg og ide-scsi ind.
Under opstarten skriver linux følgende til mig:
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AHA-294X Ultra SCSI host adapter>
scsi : 1 host.
Vendor: IBM Model: DDRS-34560D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: FUJITSU Model: M2949Q-512 Rev: 0155
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: MATSHITA Model: PD-2 LF-D100 Rev: X120
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
Vendor: CONNER Model: CFP1080S Rev: 4649
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI cdrom 3 SCSI disks total.
(scsi0:0:4:0) Synchronous at 10.0 Mbyte/sec, offset 15.
sr0: scsi3-mmc drive: 0x/0x dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.11
(scsi0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 8.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8925000 [4357 MB] [4.4
GB]
(scsi0:0:1:0) Synchronous at 40.0 Mbyte/sec, offset 8.
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17781964 [8682 MB] [8.7
GB]
(scsi0:0:6:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 2110812 [1030 MB] [1.0
GB]
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 2 hosts.
Vendor: LITE-ON Model: LTR-12102B Rev: NS1H
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Hvis jeg så skriver cat /proc/scsi/scsi for jeg følgende:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DDRS-34560D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: FUJITSU Model: M2949Q-512 Rev: 0155
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: MATSHITA Model: PD-2 LF-D100 Rev: X120
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: CONNER Model: CFP1080S Rev: 4649
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: LITE-ON Model: LTR-12102B Rev: NS1H
Type: CD-ROM ANSI SCSI revision: 02
Hvis jeg skriver cdrecord -scanbus får jeg følgende:
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 2.1.40
Using libscg version 'schily-0.5'
scsibus0:
0,0,0 0) 'IBM ' 'DDRS-34560D ' 'DC1B' Disk
0,1,0 1) 'FUJITSU ' 'M2949Q-512 ' '0155' Disk
0,2,0 2) *
0,3,0 3) *
0,4,0 4) 'MATSHITA' 'PD-2 LF-D100 ' 'X120' Removable CD-ROM
0,5,0 5) *
0,6,0 6) 'CONNER ' 'CFP1080S ' '4649' Disk
0,7,0 7) *
scsibus1:
1,0,0 100) 'LITE-ON ' 'LTR-12102B ' 'NS1H' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
Håber at alt dette hjælper nogen med at kunne finde en løsning til mig :)
/René