Ja, det er helt sikkert. Jeg har et Motorola surfboard, og med oplysningerne
her:
http://homepage.ntlworld.com/robin.d.h.walker/docsdiag/
kommunikerede jeg med modemet.
Dette er hvad jeg har fundet:
Download and install tftp suite pro. You can find it here:
http://www.walusoft.co.uk/tftp.htm
BTW, install it as SERVER not CLIENT
1-Goto
http://192.168.100.1/address.html and learn your DHCP servers ip (6th
coulmn) (this link is for only motorola surfboard modems but you can still
learn your dhcp server ip under "windows tcp/ip" properties too)
2-Change your pc's ip to that ip, your Subnet Mask to 255.255.255.0 and your
Default
Gateway to the same ip (the one you learnt in the first step). So this means
your Default
Gateway and ip adress will be the same (your dhcp servers ip) and Subnet
Mask is gonna be 255.255.255.0
NOW RUN TFTP SUITE (it should show the ip which you learnt and changed your
own ip to, in the first step -dhcp servers ip-)
3-Open an MS Dos prompt and write this: ping xxx.xxx.xxx.xxx -t
(xxx.xxx.xxx.xxx is the ip adress learnt in the first step). Wait until your
pc is pinged at least 15 times.
4-Now plug of your the AC cable of your modem. Wait until the ping becomes
responseless and after a few responseless ping, plug it back in to the ac.Do
not stop pinging while doing this.
5-Now watch TFTP Suite and see which file is requested by the server. Note
it somewhere.
6-Open the tftp suite's settings and set outbound file directory to
something you choose.C:/windows/desktop forexample (default is empty).
Rename the included 64knint.cm file to the one requested by the server
(extension .cm will remain the same) and put it in the directory which you
have set as outbound in tftp suite (C:/windows/desktop in our example).
7-Start pinging the pc again and after 15 times or so unplug the AC cable
again.Wait untill ping becomes responseless and plug it back in.
8-Stop pinging after the pc replies "two times".
9-Watch the file going and get excited...
10-Now goto tcp/ip and choose Obtain an ip address automatically (that was
your default setting before starting hacking operation).
11-You are back online but with a slight difference:Your connectionn speed
is 10mbit!
If nothing is requested by the server, put a shortcut to tftp suite in your
start up and after a reboot you can make sure that the server will ask for
the file. But of course tcp settings should remain as described above while
doing this. When successful, change the setting to "obtain an ip address
automatically".
The only step you can not succseed here may be learning your dhcp servers ip
(which means you are an idiot) so once again: you can learn it by opening
tcp/ip properties in windows.
IMPORTANT NOTE:If you have a firewall installed this would definetly prevent
tftp suite from being asked for the file and most of the time disabling the
firewall is not enough. You have to uninstall it completely from the pc. XP
users should not forget to disable the internal firewall of xp. This would
do ok if no other firewall is installed at all. Once again: with a firewall
installed you get nothing requested and xp's internal firewall applies too
(disable it).
DO THIS AT YOUR OWN RISK AND DO NOT FORGET THAT THERE IS THE RISK OF GOING
TO PRISON IF YOU GET BUSTED. I TAKE NO RESPONSIBILITY FOR WHAT YOU DO WITH
THESE KNOWLEDGE AND THEY ARE FOR EDUCATION PURPOSE ONLY!
BTW I HEARED OF NOBODY GOING TO JAIL AFTER DOING THIS BUT DO NOT BLAME ME IF
YOU BE THE FIRST!
And never forget to completely uninstall the firewalls in order to get the
file asked and sent. Disabling is not enough.
The hacked script which you need is (64kint.cm which is mentioned above) you
need is at:
http://briefcase.yahoo.com/bc/kirazarik/lst?.dir=/Cable&.view=l
And there is also a jpg there (proof.jpg) which shows the hacked script
being sent by tftp suite for those who do not beleive.
------
Så det er bare med at komme igang... :)
"Andreas Plesner Jacobsen" <apj@daarligstil.dk> skrev i en meddelelse
news:slrna4lsd5.qg.apj@slartibartfast.nerd.dk...
> In article <3c4af114$0$237$ba624c82@nntp03.dk.telia.net>, Martin Jørgensen
wrote:
>
> > Stofa kører 1000 kbit ned og 256 kbit op i kolding! Ja, det er et sjovt
> > "skævt" tal, de har valgt for download, men det er kabelmodemet, som
bliver
> > begrænset under initialiseringen. Man skulle vidst lige pille ved den
> > initialisering... Det kræver ret sikkert "kun" en TFTP server samt en
> > sniffer...
>
> Du mener altså at konfigurationen foregår på ethernet-siden af modemmet?
>
> --
> Andreas Plesner Jacobsen | Microbiology Lab: Staph Only!