"Sørensen" <nogen@microsoft.com> skrev i meddelelsen
news:486549a3$0$56767$edfadb0f@dtext02.news.tele.dk...
>
> "Lasse K> skrev >
>> Det største problem er dog, at jeg ikke kan få adgang til brugerfladen.
>> Nogen gode idéer? Jeg har læst alt hvad google kan finde.
>>
>>
> Nej har du nu læst ALT hvad google kan finde ?? søgning på:
> interjak+300+reset
>
> FORGOTTEN PASSWORD OR UNUSABLE CONFIGURATION
>
> If you forget the administrator name and/or password, or if you make
> erroneous
>
> configuration changes that prevent you from accessing the InterJak Web
> Manager,
>
> you can use the "Recovery" button to force the InterJak into a recovery
> state from
>
> which you can reset the entire configuration.
>
> See "Operational and Recovery Image" on page 285.
>
>
>
> 285:
>
> ?? Manually:
>
> This is achieved through the "Recovery" button as described below.
>
> In all of these cases, the recovery image will be started and you will be
> notified on
>
> the Web Manager login page that the InterJak is running the recovery
> image. But
>
> there are subtle differences between the results of these three methods.
>
> If the recovery image was started because of a software load failure or
> through the
>
> Web Manager:
>
> ?? You must log on to the Web Manager using the administrator name and
>
> password configured in the InterJak.
>
> ?? The firewall will be active.
>
> ?? You will be able to transfer a new operational software image to the
> InterJak.
>
> If the recovery image is activated manually through the "Recovery" button:
>
> ?? You must log on to the Web Manager using the default administrator name
> and
>
> password:
>
> Name: administrator
>
> Password: AaBbCcDdEe
>
> ?? The firewall will not be active.
>
> ?? You will be able to transfer a new operational software image to the
> InterJak.
>
> ?? You will be able to reset the configuration file to its default value.
>
> NOTE This will not affect the user database configured in the InterJak.
>
> In order to activate the "Recovery" button you must:
>
> 1 Unplug power from the InterJak.
>
> 2 Press the "Recovery" button located on the rear side of the InterJak.
>
> 3 While keeping the "Recovery" button pressed in, reapply power to the
> InterJak.
>
> 4 Release the "Recovery" button.
>
>
>
> osv osv.......................
>
>
>
> vh.
>
> Sørensen
>
Hey tak for info. Sådan! Det kunne jeg ikke finde. Havde bare søgt på
navnet. Mange tak
