On Fri, 16 Aug 2002 22:19:34 +0200, Martin <newsspam4@mail.edlich.dk> wrote:
> Ja, den gør det fordi der bliver krydspostet til de grupper. Hvis du
> poster din leafnode.config, så kan jeg fortælle hvilken linje der skal
> gøres noget ved.
[[Glemte at jeg skrive før at jeg FUT'ede denne til dk.edb.system.unix,
det er hermed gjort, også for dette indlæg:]]
Takker ærbødigst, jeg går ud fra det har noget med maxcrosspost at gøre?
Indholdet kan beskues her:
## This is the NNTP server leafnode fetches its news from.
## You need read and post access to it. Mandatory.
server = news.cis.dfn.de
## Unread discussion threads will be deleted after this many days if
## you don't define special expire times. Mandatory.
expire = 100
##
## All the following parameters are optional
##
## I have free access to my news server. If you don't have, comment out
## the following two lines and change them accordingly.
username = xxxxxxxx
password = xxxxxxxx
## Standard news servers run on port 119. If your newsserver doesn't,
comment
## out the following line and change it accordingly.
# port = 8000
## This is another news server which stores some groups that are not
## available on the first one. You can define username, password and
port
## for each server separately.
server = news.it-c.dk
username = xxxxxxxx
password = xxxxxxxx
# timeout = 30
## This is a news server which does not understand the
## "LIST NEWSGROUP news.group" command. For this reason, we don't try to
## download newsgroups descriptions when getting new newsgroups. This is
## achieved by putting "nodesc = 1" somewhere behind the server
## line.
server = news.sunsite.dk
# server = news.cybercity.dk
# nodesc = 1
## Here we have another news server which has a very slow connection.
For
## that reason, we wait a full minute before we give up trying to
connect.
## The default is 10 seconds.
server = sslug.dk
# timeout = 60
## Non-standard expire times (glob(7) wildcard constructs possible)
# groupexpire comp.os.linux.* = 5 # groups too big to hold articles 20
days
# groupexpire any.local.newsgroup = 100 # very interesting, hold
articles longer
groupexpire dk.test = 0
groupexpire uk.comp.sys.mac = 50
groupexpire alt.
www.webmaster = 5
## Never fetch more than this many articles from one group in one run.
## Be careful with this; setting it much below 1000 is probably a bad
## idea.
maxfetch = 2000
## Fetch only a few articles when we subscribe a new newsgroup. The
## default is to fetch all articles.
initialfetch = 500
## If you want to use leafnode like an offline newsreader (e.g. Forte
## Agent) you can download headers and bodies separately if you set
## delaybody to 1. In this case, fetch will only download the headers
## and only when you select an article, it will download the body.
## This can save a huge amount of bandwith if only few articles are
really
## read from groups with lots of postings.
## This feature works not very well with Netscape, though (which is not
## a fault of Leafnode).
# delaybody = 0
## To avoid spam, you can select the maximum number of crosspostings
## that are allowed in incoming postings. Setting this below 5 is
## probably a bad idea. The default is unlimited crossposting.
maxcrosspost = 6
## If you suffer from repeatedly receiving old postings (this happens
## sometimes when an upstream server goes into hiccup mode) you can
## refuse to receive them with the parameter "maxage" which tells the
## maximum allowed age of an article in days. The default maxage is 10
## days.
maxage = 30
## maxlines will make fetch reject postings that are longer than a
certain
## amount of lines.
# maxlines = 200
## minlines will make fetch reject postings that are shorter than a
certain
## amount of lines.
minlines = 1
## maxbytes will make fetch reject postings that are larger
maxbytes = 250000
## timeout_short determines how many days fetch gets a newsgroup which
## has been accidentally opened. The default is two days.
timeout_short = 1
## timeout_long determines how many days fetch will wait before not
getting
## an unread newsgroup any more. The default is seven days.
# timeout_long = 6
## timeout_active determines how many days fetch will wait before
re-reading
## the whole active file. The default is 90 days.
# timeout_active = 365
## If you want to have your newsreader score/kill on Xref: lines, you
might
## want to uncomment this.
# create_all_links = 1
## If you want to filter out certain regular expressions in the header,
## create a "filterfile" (how this is done is explained in the README)
## and set
# filterfile = /path/to/your/filterfile
## If your newsreader does not supply a Message-ID for your postings
## Leafnode will supply one, using the hostname of the machine it is
## running on. If this hostname is not suitable, this parameter can be
## used to override it. Do not use a fantasy name, it may interfere
with
## the propagation of your messages. Most modern newsreaders do provide
## a Message-ID.
hostname = wintermute.verture.net
--
Jonas @ 55.75, 12.42 | Husk på, de fleste browsere ikke tolererer
<
http://verture.net/> | hovsa-programmering i den grad, som IE gør det.
- Miccel i d.e.i.w.ris+ros